The Champion

Be Inflexible About Flexible Cord and Cable Use Part 1

Sometimes, you need an electrical cord that bends a little. Maybe it’s because you have to use your power drill or saw in many different locations during the workday. Maybe it’s because a piece of machinery vibrates when it’s operating and you don’t want to transfer that vibration throughout your electrical system. Or, maybe it’s because your elevator moves up and down and you’d like the electric lighting inside the cab to move up and down with it. For all of these applications, you’ll want to use a flexible electrical cord or cable.

Because these cords are more vulnerable to damage than fixed wiring, there are restrictions on their use and precautions to observe. When it comes to flexible electrical cords and cables, you should be inflexible on the issue of safety.

Permissible Uses for Flexible Cords and Cables

Workers may be familiar with the common extension cord, but flexible electrical cords and cables have other important uses, too. Flexible cords and cables may be used for the following applications for which flexibility and portability (and/or isolation) are key to function and for which cords are readily accessible for inspection, maintenance, and repair:

  • Pendants
  • Fixtures
  • Portable lamps or appliances
  • Elevator cables
  • Cranes and hoists
  • Data processing cables
  • Stationary equipment when frequent interchange may be required
  • Other fixed or stationary appliances, where flexible cords and cables are accessible for and facilitate maintenance and repair
  • To isolate noisy or vibrating equipment (preventing the transmission of noise or vibration)

Prohibited Uses

There are some situations in which you must not use flexible cords and cables. Never use flexible cords and cables:

  • As substitutes for structural fixed wiring
  • If they would be attached to building surfaces
  • If they would be run through holes in walls, ceilings, or floors or they would be run through doorways, windows, or other openings
  • If they would be concealed behind building walls, ceilings, or floors
  • Flexible cords and cables cannot be used in those types of applications in part because they would be subject to damage that could create a fire or electrocution hazard. In some instances, the damage would present an immediate hazard, such as when an extension cord’s insulation is damaged by scraping against the sharp edge of a floor hole, exposing the wires. In other instances, damage to the wiring would be inaccessible for inspection, maintenance, and repair. This can occur, for example, when flexible cord substituted for fixed building wiring or installed behind walls, ceilings, or floors is chewed by rodents, exposing the live wire and creating a fire hazard.

 

Upcoming MSF Safety Workshops
Register

June 3 –   Bozeman
June 4 –   Butte
June 5 –   Great Falls
June 9 –   Helena
June 11 – Miles City
June 12 – Billings
June 18 – Kalispell
June 19-  Missoula

Upcoming SafetyFestMT 
Butte: June 2-4, 2015
Billings: November 16-20, 2015